car pulley belt

For decades, drive belts, V-belts, multi-vee-belts, and serpentine belts have already been used to transmit power from the engine crankshaft pulley to components, such as the power steering pump, air conditioning compressor, water pump, or cooling fans. Toothed timing belts and timing chains, too, are used to transmit power from the crankshaft to the camshafts, and some from the camshaft to camshaft, based on engine design.

The drive belt, timing belt, or timing chain won’t work very well, or for very long, if at all, with incorrect tension. A loose drive belt won’t drive the accessory reliably, slipping and producing sound. Conversely, an excessively restricted belt may cause item or pulley bearing harm. Various types of tensioner pulley preserve long-term engine and accessory quietness and reliability.

Tightening or Loosening
Sometimes, maintenance or repair will demand tightening or loosening a tensioner pulley. Replacing a drive belt or timing belt, for instance, would need you to loosen a tensioner pulley to create room for the brand new belt, as the brand new belt is smaller compared to the worn drive belt.

You will have to tighten a tensioner pulley, generally, after the installation of a new drive belt, or even to Car Pulley Belt change for a stretched drive belt that hasn’t worn enough to warrant replacement. Stretch out belts don’t require tensioner pulleys but are “stretched” into place using a special tool-always utilize the special tool to avoid belt damage.

Tensioner pulleys generally fall into two classes: accessory-integrated (AI) and non-accessory-integrated (NAI). Think about AI tensioners as adjustable accessories, such as for example an alternator, and NAI tensioners as adjustable idler pulleys. There are three types of tensioner pulleys and several methods to loosen them.
Mechanical tensioner pulleys will be the simplest, many common, and least prone to failure. There is definitely one caveat, however, as mechanical tensioner pulleys require manual adjustment. This makes them susceptible to user error, leading to insufficient or extreme belt tension. Additionally, they need to be adjusted to compensate for belt stretch over time.

Tags:

Recent Posts