electric fan motor

Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Surroundings Compressor diameter TPI fans. Made to run an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed electric fan motor china Control switch. All of the wiring in the middle of your electric electric motor, capacitor and quickness control change is still installed nevertheless the cord itself is generally detached as observed in the photos. (Discover “Control Notice” below for change type.)
T (See “Program Notice” below for utilize in a variety of other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is definitely½” (0.500″) diameter x 2 ½” long with a collection screw soft. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric powered motor) is Clockwise.

Control Take notice: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). These two types of switches both control the engine in the same way (but you possess a rotating knob and you possess a pull-chain). In the event that you order several motor at the same time, we can do our better to supply your purchase with each one sort of control or the additional.
Application Note: Do NOT use this electric motor in a nonfan software. This is a totally enclosed fan electric engine and designed to have continuous ventilation over the motor casing for cooling. The housing isn’t vented and the electrical electric motor will overheat and enter automatic thermal overload if run in a nonfan program where there isn’t strong ventilation past the engine. (Caution Note: the electrical motor will restart immediately when it cools back off.) Using this electric motor for applications apart from 18 & 24″ TPI fans could also overload the motor and lead it to proceed into automated thermal overload. (Your companion blade from another manufacturer may have a steeper blade position.)
Origin: This electric electric motor is manufactured in China.

Tags:

Recent Posts