helical bevel gear reducer

The EP Series Helical Bevel Reducer provides unmatched performance, durability, and style flexibility. This unit provides torque capacities up to 20,000 Nm (14,750 ft lbs).
The cat4CAD software allows simple interactive product selection of the entire gearbox and gear-motor system. Cat4CAD supports you in selecting and configuring the products, provides you the chance to print out considerable technical data linens, and generates complete 2D drawings and 3D versions for direct download.
11 sizes
Insight power capacities from 0.16 to 120 HP
Gear ratios from 5:1 to 8900:1
Torque capacities to 20,000 Nm
Inverter duty course F insulated motor windings
Class 12 Helical and Spiral Bevel Gears: Provides higher efficiencies and higher torques in smaller sized sizes.
Multiple Input Options: Integral gear motors, in . or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft mounting, inch and metric helical bevel gear reducer result shafts, mounting pilots and flanges offer a wide range of design solutions.
UNIBLOCK Housing: For maximum rigidity, universal installation on five sides or with a torque arm.
Worldwide Electric motor: Multiple leads and windings for worldwide multi volt/Hz requirements in addition modular design to simply accept brakes, encoders or pressured cooling.
High efficiency motor design available
Innovative self-locking, self-aligning taper shaft motor connection
Gearbox supplied factory filled up with synthetic oil
Corrosion and shock resistant cast iron housing
High efficiency helical-bevel gears. 98% per stage
Normally closed breather with multiple locations (Optional OtN2000)
Double lip seals upon heat treated, plunge floor shafts
Shaft mounting options include tapered bushings designs
This is a thorough offering of energy-efficient, right angle helical bevel enclosed gearing. It really is obtainable as gearmotors and a number of reducers with torque capacities up to 119,000 inch pounds. Housing designs include footed, face and flanged configurations. Gearmotors are available in three stage high efficiency designs through 50 HP and single phase to 5 HP. We provide a selection of input and output shaft choices. Additionally, you will see fixed and variable speed motors and selection of ratios available in this product offering.
Features
Accommodates insight power from ΒΌ Hp to 75Hp
Torque rankings up to 119,489 in-lbs
Reduction ratios up to 7,500:1
Helical – bevel – helical gear train offers affordable high and low speed solutions
Up to 94% efficient
Four input options available for all units
Two output flange choices – B5 and B14
Multiple output shaft interfaces
Crucial dimensions interchangeable with major competitors
Modifications / Accessories
Integral Gearmotor
Clamp Collar C-Face Input
Solid Shaft Input
3-Piece Coupled C-Face Input
CEMA Screw Conveyor Adapter
EZ Kleen Washdown Package
XT Output Seals
Backstop
DURABLE Output Bearings
Inch or Metric Dimensions
Common Applications
Troughing Belt Conveyors
Slider Bed Conveyors
Mixer Drives
Screw Conveyors
Bucket Elevators
General Industrial Machinery
Common Industries
Aggregate and Cement
Air Handling
Chemical, Oil, and Gas
Food, Beverage, and Pharmaceutical
Paper and Forest
Unit and Baggage Handling
Water and Wastewater
As per the growing and varying needs of customers, we offer an array of Helical Bevel Equipment Reducers. The technological articles of our products allows for an extraordinary efficiency/lifespan ratio. The highly versatile Helical Bevel Gear Reducers we offer are successfully used in a multitude of industrial and civil applications. They are B-Series units which offer excellent affordability and result torque/weight ratio, especially due to the fact they need not a lot of servicing. Besides these, our products are available in cast iron (sizes 063 to 163) or aluminium (sizes A42 to A73) casing.
Features:
Sizes: 060-080-100-125-140-150-160
Available versions: B-fitted for engine coupling, IB with input shaft, CB with compact motor, PB-fitted for engine coupling with flexible joint
Casing with foot FC, flange SC and universal UC
Power up to 90 kW
Gears hardened and tempered with shaved or surface profile
Gearing with 3 reduction stages
Gleason spiral bevel equipment pairs with run-in profile, mounted as second reduction stage for a higher resistance
Reduction ratios between 5, 71 and 187, 24
Torque max 13.000 Nm and admissible radial loads max 80.000 N
High-strength casings optimized with FEM analysis and input and result flanges of grey cast-iron G200 to ensure best level performances and high reliability
Load capacity calculated and verified according to ISO 6336 and AGMA 2001
Painted with RAL 5010 blue epoxy-polyester powder
Accessories: torque arm, result flange, output shaft, shrink disk, backstop device, protection cover kit, viton essential oil seals, reinforced output, assemble/disassemble kit
Series EP right angle helical bevel equipment motors provide ratios from 8:1 to 160:1 in three stages or up to 10000:1 in five phases. Motors can be found up to 90kW and output torque capability up to 12,300 Nm.
The series EP helical bevel gear motor is designed with integral cast feet for base or end mounting and may be offered with single or dual extended output shafts.
Devices are also available since shaft mounted or with output flanges and are designed for mounting horizontally or vertically. The products can also be offered with a bolt on torque reaction bracket and all variants are available possibly motorised or with an input shaft assembly.
Adding to the brand new range of Ever-Power helical equipment motors the product takes benefit of our a long time of accumulated design expertise together with the utilization of top quality materials and elements. The outcome is a series of velocity reducing geared motors providing high load having capacities, increased efficiency, peaceful running and reliability.
Top features of Helical Bevel Gear Motor
Standard motor connection
Capability to fit double oil seals, on insight and output shaft because required.
All devices are dimensionally interchangeable with additional major manufacturers.
Units are manufactured and assembled from a family group of modular kits for distributor friendliness minimizing inventory and maximizing availability.
Motorized units can be fitted with a backstop module and reducer Devices can be installed with a backstop and fan.
Applications:
-Conveyors, Agitators, Elevators, Cranes, Crushers
-Helical Bevel gear motors are used in industries such as chemicals, pharma, packaging, food processing, plastic-type and automation etc.
Key Features:
Sizes: A40-A50-A70
Obtainable versions: EP – fitted for engine coupling, IEP – with input shaft, CEP – with compact motor
Cases with foot, flange or universal
Power up to 4,8 Kw
Gears with shaved or surface profile
Gearing with 2 and 3 reduction stages
Hypoid bevel gears for size A40 and A50, gleason bevel gear pairs for size A70, all with run-in profile
Reduction ratios between 7,62 and 442,76
Torque max 450 Nm and admissible radial loads max 5.500 N on hollow shaft and 10.000 N on solid shaft
Cases in die-cast aluminium alloy
Exceptional mechanical strength while being and particularly lightweight
Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88
Painted with RAL 5010 blue epoxy-polyester powder in in accordance to DIN 1843
Accessories: torque arm, output flange, output shaft.
Generallntroduction of HK series:
Gear Reducer
The EP series gear units, are novel transmission gadget and made up of Y series engine, helical gear,Arc gear and worm gear. The gears are made from high wear-resisting alloy components, specifically and finely processed.
Advantages:
1: Helical-bevel gear two-stage reducer
2: Compact structure, high efficiency
3: Quenched 20CrMnTi for gears
4: CE, ISO9001.
5: Compact design, small volume, wonderful appearance ,and solid capacity of being overloaded.
6: Precise division and wide range for transmission ratio.
7: The efficiency is up to since high as 96% with low energy usage, strong adaptability and is with the capacity of operating continually in corrosive or damp environment.
8: All- purpose use, convenient and low-cost maintenance.
9: New seal gadget, strong adaptability.
10: Varied selection of motor combinations, mouting positions and struture projects.

Tags:

Recent Posts