hydraulic planetary drive

Single and dual reduction planetary gear drives to be used with electric, hydraulic, surroundings motors or mechanical power input from high quickness, low torque sources to deliver decreased speeds at increased torques. The input side has regular SAE pads for electric motor mounting. Obtainable in the three hydraulic planetary drive Output configurations proven below. Many units can be furnished with an intrinsic parking brake.
Single reduction drives are limited to 3500 RPM input; double reduction drives to 5000 RPM. Units with integral parking input swiftness is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque ratings are intermittent. For continuous operation reduce torque rankings to about 1/3 to 1/2 the values shown. Products provide 95% power transmission efficiency.

Wheel Drive
Input side has regular SAE pads and splined insight. Output side has hub for installation automobile wheel. Free wheel can be done by using the spring disconnect to disengage the drive shaft. The disengage feature is regular on all wheel drives.

Shaft Output
Input side standard SAE pads with splined insight. Output side choices include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined insight. Output side includes a flanged spindle for coupling to the load.

Swing Drives
Ever-Power model 6 emerges with or without integral parking brakes. The “SW” Power Wheel provides extra-large tapered roller bearings, a ductile iron hub and temperature treated ring gear to reduce backlash growth caused by wear. The exterior bearing nut provides the ultimate in shaft retention and shaft strength. Output can be a spindle shaft or different sizes of essential pinion gears.


Recent Posts